Timber Retaining Wall in Underbank
A 28.8m timber retaining wall, 600–800mm high, installed for a builder to stabilise the house site cut and retain the elevated ground behind the home.

- Total wall length
- 28.8m
- Wall height range
- 0.6–0.8m
- Timber sleeper thickness
- 80mm
- Steel posts
- 100UC15
Retain elevated ground behind the house site.
The builder required the site cut to be stabilised so elevated ground would not wash down into the area behind the new house. The retaining wall also helped preserve usable space on the block.
The ground was clay. An earth auger was used during installation of the steel posts.
Timber sleepers on a 1.8m post layout.
- Alignment: 28.8m long, varying from 600mm to 800mm high.
- Sleepers: 80mm-thick timber sleepers.
- Steel: 100UC15 posts.
- Post layout: 1.8m spacing.
Project photograph: timber retaining wall and steel posts installed along the Underbank residential site cut.
Start with your site and the space you need.
Send your location, wall length and heights, photographs, available plans and access restrictions so we can review the scope.
