Underbank, Bacchus Marsh · Residential builder project

42m Timber Retaining Wall in Underbank

A separate builder project in Underbank, with 42m of timber retaining wall installed to stabilise a house-site cut and retain the elevated ground behind the future home.

Timber sleeper retaining wall with steel posts along a cut house site in Underbank, Bacchus Marsh.
Wall length
42m
Wall height
0.6–0.8m
Timber sleeper thickness
80mm
Steel posts
100UC15
The site requirement

Keeping elevated ground behind the wall.

The builder needed the site cut stabilised so the higher ground would be retained rather than washing down towards the back of the house. The wall also helped define the usable area of the new-home site.

The ground was clay, with an earth auger used for the post foundations. This separate 42m installation followed the same construction approach as our earlier Underbank project for another builder.

The completed wall

Timber sleepers on steel uprights.

  • Wall dimensions: 42m long, with heights of 600–800mm.
  • Sleepers: 80mm-thick timber sleepers.
  • Posts: 100UC15 steel.
  • Nominal post spacing: 1.8m.

Project photograph: the separate 42m timber retaining wall installation in Underbank.

Planning residential retaining works?

Start with your site and the space you need.

Send your location, wall length and heights, photographs, available plans and access restrictions so we can review the scope.