42m Timber Retaining Wall in Underbank
A separate builder project in Underbank, with 42m of timber retaining wall installed to stabilise a house-site cut and retain the elevated ground behind the future home.

- Wall length
- 42m
- Wall height
- 0.6–0.8m
- Timber sleeper thickness
- 80mm
- Steel posts
- 100UC15
Keeping elevated ground behind the wall.
The builder needed the site cut stabilised so the higher ground would be retained rather than washing down towards the back of the house. The wall also helped define the usable area of the new-home site.
The ground was clay, with an earth auger used for the post foundations. This separate 42m installation followed the same construction approach as our earlier Underbank project for another builder.
Timber sleepers on steel uprights.
- Wall dimensions: 42m long, with heights of 600–800mm.
- Sleepers: 80mm-thick timber sleepers.
- Posts: 100UC15 steel.
- Nominal post spacing: 1.8m.
Project photograph: the separate 42m timber retaining wall installation in Underbank.
Start with your site and the space you need.
Send your location, wall length and heights, photographs, available plans and access restrictions so we can review the scope.
